Cutting machine maintenance methods and maintenance of the need to pay attention to matters
2023/03/04
It is an indisputable fact that the cutting machine needs maintenance. The service life of the cutting machine without daily maintenance will be greatly reduced. If the maintenance work is done well, the good performance of the cutting machine can be maintained, and the life of the parts can be maintained.
First understand the maintenance method of cutting machine
1. When using the machine, pay attention to whether the lubricating oil in the oil pot is still displayed. If it is not displayed, it means there is no lubricating oil. Please add lubricating oil again.
2. When sending lubricating oil into the four sliding shafts, just shake the handle back and forth.
3, circulating oil is recommended to use "R-68#"; circulating oil, circulating oil for half a year, to replace the new circulating oil. Replace it once a year.
4. Start after long-term shutdown → lubricate the four sliding shafts.
Cutting machine maintenance need to pay attention to the place
1. The platform of the cutting machine should be wiped clean frequently and should not be stained with lubricating oil, so as not to touch the cut and affect the appearance of the finished product.
2, the chopping board can not leave residue debris, or stained with lubricating oil, it is better to clean every day to keep clean.
3, add lubricating oil should pay attention not to touch other parts, if touched to wipe clean.
After the cutting machine is used, be sure to clean the surroundings to keep the machine clean.
Previous
Previous Page
2023-03-17
