Accuracy
The four-axis movement of X, Y, Z and C forms a three-dimensional cutting surface, which achieves good cutting of various curves and radians, and uses servo motors and frequency converters to complete the accuracy of instructions. Unique software automatic control system automatically distinguishes straight lines and arcs during cutting, and automatically adjusts the cutting speed according to lines to achieve high-precision cutting;
The whole adsorption, the fabric is smooth, the consistency is good, and the high-precision cutting is achieved; the unique sharpening method, the knife edge is even and flat to achieve high-precision cutting.
High energy saving efficiency
Sealed bristle rotating cavity, no air leakage; There are seven sections to choose from for adsorption strength to reduce unnecessary adsorption strength. The re-covering plastic film running synchronously with cutting covers the cut knife edge, reduces the air leakage generated by the gap between the knife edge, and saves the consumption of electricity and energy.
Saving later consumables
According to the different fabric materials, adjust the sharpening interval to change the service life of the knife. The cutter head is set to prevent static electricity and has no antistatic requirement for consumables. The bristles rotate with synchronous belts on both sides. The friction between the synchronous belts and the rotating bearings is small, reducing bearing wear and saving consumables. The sharpening stone adopts emery to increase wear resistance and improve the life of the sharpening stone;
The setae is made of special nylon polymer material, which has good flexibility, easy to avoid knives, and prolongs the service life of the setae (about 1/3 longer than the service life of the same equipment).
Different ways of control
The PC is used to compress the integrated block to control the equipment. Similar equipment mostly uses traditional integrated block control equipment, resulting in a complex internal structure of the equipment and a large appearance; X, Y, Z (control turning), C (control knife up and down) The working principle of the four-axis is driven by a servo motor. There are uniform air suction holes under the bristles, the air suction is consistent, the fabric smoothness is good, and the cutting accuracy is improved. The cloth scraps generated after cutting are collected and filtered through the filter screen and discharged outside through the silencer pipe. The working environment is clean and will not stick fly dust to the cutting pieces of different colors, causing stains on the cutting pieces. Due to the sealed box, it reduces air leakage, saves electricity to a large extent, and works 15 kW normally.

Fast: The cutting speed is 4-6 times of the traditional manual cutting speed, realizing fast cutting, especially for customers with small orders, many styles and short delivery time, which has the advantages of fast discharging and fast production;
Accuracy: using up and down reciprocating straight knife cutting, high precision, fast speed, sample installation distance can be accurate to 1mm, and continuous cutting, to avoid the damage of laser cutting on the fabric, while avoiding the error of manual cutting, more accurate discharge, to ensure the quality of the forming process of cutting fabric;
Savings: the fabric utilization rate can be increased by an average of more than 5%, saving the direct cost of the fabric;
1. Import industry technical and technological standards, and design exclusive for multi-layer cutting of soft fabrics, reach the product standard level in terms of performance, stability and accuracy, and are suitable for cutting at any height within 7cm (woven 50mm);
2. The cutting speed is fast, the noise is small, the operation is stable and reliable, the main knife motor speed is up to 4500 min, and the cutting speed can reach 90 m/min;
3. Straight knife vibration cutting, no pollution to the material, suitable for textile, clothing, luggage, shoes and hats, auto seats, bedroom accessories, aerospace, medical and health industries and other soft, light body fabric cutting;
4. The cutting bed control system has strong compatibility, fast running speed and stable performance, supports and converts multi-source data, and can easily read various cutting file formats to facilitate the input and exchange of documents. You can choose to upgrade the device to realize remote control of people and machines;
5. According to the process scheme of sectional adsorption and sectional cutting, the simultaneous operation of cutting, picking up and paving can be realized, saving cutting time, improving cutting efficiency, simple operation of the control panel and clear identification;
6. Vacuum adsorption mute technology, to create a quiet and comfortable working environment.