Cutting automation will replace the traditional model

In the process of clothing production, the rolls of fabric are spread out layer by layer according to a certain length on the cutting table and cut off, which is the process of clothing production line. This process is similar to steel plate uncoiling and discharging, but due to the ultra-thin and soft nature of the cloth, the principle of steel plate uncoiling and discharging cannot be used to realize the automation of cloth uncoiling and cutting.
Cloth is mainly divided into two kinds, one is thick cloth, such as woven material, this kind of cloth can usually use ordinary cloth pulling machine to be competent, the other is knitted cloth, especially underwear cloth, its elasticity is strong, thin material, and soft, manual processing is very slow, and the effect is very unsatisfactory, usually resulting in pulling, retraction, not neat and other phenomena, for underwear "one millimeter of the world", high-quality underwear must choose high-quality cloth laying machine.
Because the function of the cloth spreading machine is similar to that of the cloth spreading machine, many people will confuse the two.
01 The operating principle of the cloth spreading machine
The cloth spreading machine is through the active rotation of the cloth, so that the cloth into a natural state without external force, layer by layer to the table, suitable for various length of the application.
02 the operation principle of cloth machine
The cloth pulling machine pulls the cloth out of the cloth roll. Although the cloth roll can also be fed actively, because of the weight of the cloth, some tension will be generated, which is suitable for applications with a length of less than 10 meters.
At present, in many clothing production lines can only be seen in artificial paving cutting.
However, there are many disadvantages in manual paving and cutting, such as: labor intensity
According to the 8-hour working system, each shift has to walk 35 m/min × 60 min × 8 hours = 16.8km back and forth on the production line.
Low production efficiency
People's walking speed and physical fitness are limited and will not be improved, and with the increase of working hours, people will become more and more tired, resulting in a decline in efficiency, the monotonous nature of the work will also cause the cutting efficiency is not high.
Artificial height
A cloth cutting process with not too high technical content must be equipped with at least 6 operating employees. With the implementation of the new labor law, the labor cost of the enterprise is directly higher, and the serious shortage of labor in the Pearl River Delta and Yangtze River Delta is also a warning to the employment of enterprises.