How to change the blade of the cloth breaking machine
2023/03/04
After the blade of the cloth breaker is used to a certain extent, it is seriously worn and the cutting effect is not good. At this time, the blade needs to be replaced. So how to replace the blade of the breaking machine?
Before we begin, we confirm that the power cord plug of the machine has been removed from the patch panel and the power supply has been disconnected.
Then remove the whetstone, the weight iron and the protective cover of the cloth breaking machine in turn.
Then use a small screwdriver into the small round hole on the blade to prevent the blade from rotating. Use a wrench to unscrew the nut in the middle to remove the blade.
Then you can replace the new blade, install the blade, and put the removed parts back in turn.
It is worth noting that there should not be too much gap between the round blade and the bottom knife, otherwise it will affect the cutting effect, and there will be situations such as cabling and continuous cutting. The whole process must pay attention to the operation!
2023-03-17
